This BMW 7 E65 kit contains everything you need to swap your old, blacked-out projectors for powerful new bi-xenon HID projectors. Using the exact same mounting points, it makes retrofitting quick and easy. And, most importantly, it will take your 7 to the next level – just check out the test pictures! This is way beyond what the majority of OEM projectors can achieve.

The EvoX-R 2.0 is without a doubt the brightest bi-xenon projector our light meter has ever gauged, enabling you to use D1S, D2S, D3S and D4S bulbs, including the most powerful options from Osram and Philips. Available bulb colour temperatures range from 4300K to 6500K. You will literally outshine the competition. The crystal-clear 3.0-inch lens throws a wide low beam with a solid hotspot and sharp cutoff. As for the high beam? It’s like the sun. And because only the projector is replaced, the leveling system keeps working as original.

Such a light output would not be possible without efficient ballasts. If you’re happy with the ballasts that you’ve already got, simply leave them in place. Alternatively, add a set of our Aharon digital 35W ballasts to your order. The Aharon ballast has – as opposed to many other aftermarket units – been tested to generate a full 35W. It comes in a rugged and extremely compact housing perfect for retrofitting, and its in-wire starter warms xenon HID bulbs in as little as five seconds. The Aharon ballast is also Canbus-proof, so you won’t get any bulb failure readings on your display. Please be advised, the input is a 9006 type connector, OEM ballasts usually have different input connectors. So you will need to find the Positive and Negative wire which are used for the low beam signal to connect to the input of the ballast. Also mounting will be different. So this requires some DIY. With the Aharon ballasts and wiring, power supply is strong, steady and reliable.

Lastly, this kit provides every single part that you will need for retrofitting. In order to keep the price low, we have however assumed that you will keep your existing xenon HID bulbs. Depending on how old those are, you may want to also order a new set of bulbs to get the most out of your retrofitted system. Xenon bulbs do lose up to 70% of their maximum brightness over time.

This complete BMW 7 E65 retrofit kit is inspected by our internal quality control and comes with a solid 2-year warranty. It also includes highly rated technical support from your lighting experts at Retrofitlab.com

Should you have any questions prior to purchase, please refer to our FAQ page or start a chat below. You can also download our free brightpaper on automotive lighting. Nothing beats making an educated decision!

We look forward to brightening your day (not to mention your night)

* Non-dynamic Hella bi-xenon (beam stays in place when steering wheel is turned)

Installation
This is an advanced retrofit because of the type of sealant that is used. Discounting removal and replacement of the headlights, you could expect the job to take anything from 6 to 8 hours.

You have to open the BMW 7 E65 headlight because of the shroud (lens cover) that can't be removed from the rear. Simply remove the existing projector through the bulb access port at the rear and replace it with your upgraded projector. Done.

FAQ and DIY information
For general installation and DIY information, please check our FAQ and/or DIY pages.
FAQ for frequently asked questions, and answers :-), about products, product information ordering, shipping, returns, warranty, etc. You can find the FAQ PAGE HERE
DIY for Do It Yourself information about installation, product details etc. You can find the DIY PAGE HERE

Professional installation
This complete kit has been especially developed to enable retrofitting at home, saving you the cost of installation. However, should you prefer to have the kit installed by a professional? Check out the LIST OF DEALERS / INSTALLERS
Please note that, for professional retrofits, you should order your Retrofitlab kit or parts directly from the workshop in question (it saves you money on shipping).

* Dynamic Hella bi-xenon (beam moves when steering wheel is turned)

Installation
This is a very advanced retrofit; as opposed to most of our kits, this one does require ample experience to be installed. Discounting removal and replacement of the headlights, a skilled retrofitter could expect the job to take a full day.

Installation requires for the BMW 7 E65 headlights to be opened. This is easier said than done due to the rock-solid permaseal employed. You can look forward to several joyful hours, just opening the headlights. On the other hand, once you’ve succeeded doing so, installation of the new projectors, bulbs and ballasts is very straightforward, but because of the AFS system, you need to be aware of the settings. At the end of the day, we’re sure that you’ll agree that it was all worth the effort.

Disclaimers
These products are not ECE or DOT/FMVSS108 approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage. You can find more info HERE
The product images are for illustration purposes only and may not be an exact representation of the product. Actual products may vary due to changes in manufacturing/product enhancements. You can find more info HERE

In the video below we compare the original projector with the new one used in this kit.

This customer video is intended to provide a general idea of the output and light pattern from a projector retrofit. It does not necessarily represent the exact setup in this product/kit, it's made with the Optimus TR mini with Osram bulbs

BMW 7 E65

BMW 7 E65 01-05 bi-xenon headlight repair & upgrade kit for Non dynamic xenon headlights

BMW 7 E65 01-05 bi-xenon headlight upgrade kit for halogen headlights